More on Cleaning your BeerBox®
How to CLEAN a BeerBox®:
- Remove CO2 Injector and release all pressure
- Unscrew faucet nut and remove faucet
- Drain any remaining beer and sediments from BeerBox®
- Rinse thoroughly with clean water
- Fill with 2.5 gallons of water, and add 1 tablespoon of PBW
- Re-attach faucet and tighten faucet nut
- Shake vigorously to help dissolve all PBW
- Let sit for 3 to 30 minutes
- Unscrew faucet nut and remove faucet
- Drain completely
- Fill with clean water, and rinse
- Fill with 2.5 gallons of water, and add 1/2 ounce of Star San, or other sanitizer
- Re-attach faucet and tighten faucet nut
- Shake vigorously to help distribute sanitizer
- Let sit for 1-2 minutes
- Unscrew faucet nut and remove faucet
- Drain completely, shaking to release water and foam
- Let dry and then re-attach faucet and nut
- YOU are now ready for your next fill… Brewing Tools does recommend that you wash when you are finished with a batch (i.e. don’t let it sit dirty, it’s much better to let it sit empty and clean!).
- And if you want, watch our video: